Ifi Audio Zen Phono | MM/MC Phono Amplifier
- Estimated delivery: Oct 11 - Oct 15
-
Free shipping on all orders over $125
Ifi Audio Zen Phono - MM/MC Phono Amplifier Detail :
In difference of any other entry-level phono stage, IfI Audio came with a new phono amplifier :The Zen Phono.
It has :
- MM/MC from 36dB >72dB gain. Super-silent noise floor -151dBV
- Precise RIAA with Balanced output, performance comparable to +$1k phono stages
AI sub-sonic filter. Addresses warp without eliminating bass or causing phase issues
Flagship phono amplifiers create their own power supply off the mains, like a mains regenerator. This is fundamental to a well-designed phono stage. Without this, it will struggle to amplify the signal without added noise. This is why phono stages ‘hiss’ so annoyingly.
Unusually, the ZEN Phono has its own high-tech clean power supply. It creates a 1.2MHz power supply (20,000x mains frequency of 60Hz). In this circuit, a 10uF filtering capacitor = 200,000uF at lower, audible frequencies. With serious levels of noise filtration, it performs at the level of well-designed LC filtering circuits as found in classic tube amplifiers. Further, located on its own ‘island’ PCB, it is isolated so there is no noise pollution of the analogue stage.
Just super clean +/- 12V DC.
Measured EIN (Equivalent Input Noise) is -151dBV. It is 20dBV quieter than some Stereophile Class A+ phonos which are -131dBV.
Mil-spec RIAA
The EQ circuit uses multiple TDK C0G capacitors in parallel. This is for best stability and the least distortion. They beat polystyrene capacitors and are close to Teflon.
Already using the lowest tolerance capacitors combined with multiples in parallel, tolerance is exponentially improved by the square root of the number of capacitors. This is quite a natty circuit design.
The RIAA EQ tolerance level (+/- 0.15dB) is impressive as it is en par with hand-selected capacitors!
With great circuit comes great components
The ZEN Phono has some seriously good audio components backing up the fab circuit design which has trickled-down from its ultra-fidelity AMR PH-77 and iFi iPhono siblings.
Super sub-sonic
The intelligent sub-sonic filter is from the iPhono range and is quite special.
Normal sub-sonic filters remove ‘rumble’ AND bass and cause phase issues.
The unique AI phono sub-sonic filter of IfI Audio Zen Phono removes ‘rumble’ only.
IfI Audio Zen Phono - MM/MC Phono Amplifier Specifications :
Gain settings | MC (v lo)@ MC (lo) MC (hi) MM |
72dB (+/- 1dB) 60dB (+/- 1dB) 48dB (+/- 1dB) 36dB (+/- 1dB) |
AI Sub-sonic filter | Remedies only the 'warp' in LPs | No negative impact to bass response |
Max Output Voltage (RMS) | 20v RMS bal output into 100k (< 1% THD & N) 13.5V RMS bal output into 600R (< 1% THD & N) |
|
Output Impedance: | BAL SE |
200 Ohm resistive 100 Ohm resistive |
Input impedance | MM: 47K Ohms MC High: 47K Ohms MC Low: 1.4K Ohms MC V Low: 110 Ohms |
|
Signal/Noise Ratio: | 94dB(A) MM re 2V BAL/1V UNBAL 80dB(unweighted 80kHz BW) MM re 2V BAL/1V UNBAL 84dB(A) MC Hi re 2V BAL/1V UNBAL 71dB(unweighted 80kHz BW) MM re 2V BAL/1V UNBAL 90dB(A) MC lo re 2V BAL/1V UNBAL 79dB(unweighted 80kHz BW) MC lo re 2V BAL/1V UNBAL 79dB(A) MC vlo re 2V BAL/1V UNBAL 69dB(unweighted 80kHz BW) MC vlo re 2V BAL/1V UNBAL |
|
EIN (equivalent input noise): | 0.6nV|/Hz (unweighted) MC lo/vlo 6.5nV|/Hz (unweighted) MM/MC hi |
-151dBV (A weighted) -141dBV (unweighted) -130dBV (A weighted) -119dBV (unweighted) |
Harmonic Distortion: | < -110dB / 0.0003% MM re 2V BAL/1V UNBAL < -80dB / 0.01% MC lo re 2V BAL/1V UNBAL < -86dB / 0.005% MC vlo re 2V BAL/1V UNBAL |
|
Dimensions | 158 x117 x35 mm 6.2" x 4.6" x 1.4" |
|
Power Supply: | DC 5V / 500mA | |
Net weight: | 515g (1.14 Ibs) |
Talk about hifipro
It was in 2016 that the idea of an e-commerce site for the sale of new products was born: HIFIPRO. Mario Gagnon, owner of the second-hand Audio store since 1985, nurtured his passion for music since childhood. This enthusiasm allowed him to excel in his studies and projects. Dedication, time and love for sound and its reproduction led him to open his own store. It will quickly become a reference in the sale of high fidelity devices in Canada. He and his colleagues spend a lot of time following progress and new developments in order to stay up to date with the latest technologies. After more than 30 years of success, Used Audio has acquired a very loyal customer base, participated in and obtained several recognitions from consumers and professionals during several exhibitions. For several years now, they have been shipping items across Canada, so Mario decided to create HIFIPRO. It is with great confidence that he and his team are ready to offer you the best products and services. Our goal is to help you make the best possible choice according to your needs and criteria.
Subheading text
Talk about your brand
Pair text with an image to focus on your chosen product, collection, or blog post.
Add details on availability, style, or even provide a review.